Undoubtedly you’ve seen many articles talking about mass timber, but you may not be very familiar with what products are included and some of their applications. In speaking with some light-frame component manufacturers over recent years, I have heard many of them mention that they are, or...

While admiring a Mass Timber building rising nearby, I wanted to find out if CMs can benefit from this business. Katerra apparently thinks so, first becoming a CM and later a CLT manufacturer. So far, the supply of CLT is limited – the Katerra plant is 2500 miles from this Virginia jobsite...

Not quite 20 years ago I interviewed for a position of managing a metal plate connected wood truss manufacturing plant for Anderson Lumber, in Coeur d’Alene, Idaho. For several years Anderson had been losing money from their truss operation and higher ups were searching for someone who...

Nearly every U.S. and Canadian metal plate connected wood truss manufacturer has one or more clients who either construct pole barns or sell kit packages. Not much excitement though in dealing with typical orders of usually anywhere from 4 to 10 trusses per building. Money can certainly be...

While the International Residential Code (IRC) gives the structural requirements and prescriptive design data for residential framing, additional help for the non-engineer is available through the Wood Frame Construction Manual for One- and Two-Family Dwellings (WFCM) published by the American...

While it’s well known that wood products offer a wide variety of environmental benefits – typically less embodied energy, lower air and water pollution, and a lighter carbon footprint than other commonly used building materials – it can often be a challenge to translate this...

A quick glance through the Simpson Strong-Tie® Wood Construction Connectors catalog shows that we manufacture at least 29 different models of face-mount wood-to-wood joist hangers, three separate models of face-mount wood-to-masonry hangers, 42 different models of top-flange wood-to-wood...