ASCE 7-16 Changes That Impact Truss Designs MiTek Staff 2018 International Building Code (IBC-2018) is the latest version of the I-Code which is starting to be used or adopted in the United States and in other nations. While both the 2012 and 2015 IBC referenced the 2010 edition of ASCE 7, the 2018 IBC refers to the 2016 edition of ASCE 7,... Read More November 2019 Issue #11244 Page 112
Compression or Tension Web Configuration—Which is Better? Glenn Traylor On a recent Quality Assurance Audit at a large facility, we witnessed a floor truss builder carefully spacing out his floor truss webs in the allotted space available with precision and care. He was very meticulous. I asked him why he was doing that and he explained that his in-house inspector... Read More July 2019 Issue #11240 Page 32
Attaching a Deck Ledger to a Home Through Brick or Masonry Veneer—the BVLZ Solution Rachel Holland Brick or masonry veneer has traditionally posed a problem to homeowners and contractors seeking to attach a deck to a home without removing large portions of the veneer or siding. No longer is that the case, thanks to the innovative BVLZ brick veneer ledger connector from Simpson Strong-Tie. In... Read More July 2019 Issue #11240 Page 100
Do Connectors on Both Sides of a Truss Ever Need to be Placed Exactly? Glenn Traylor Once in a while, I’m asked—Is there ever an occasion when connectors on both sides of the truss need exact placement? Well, the answer might surprise you. There are, in fact, several situations where the top face connector and the bottom face connector need to be exactly... Read More June 2019 Issue #11239 Page 38
AWC Joins Second Year of Timber-Strong Design Build Competition Robert Glowinski Eighteen teams from colleges throughout the Southwest United States and Hawaii gained hands-on experience in wood design and construction during the second annual Timber-Strong Design Build competition. AWC joined APA–The Engineered Wood Products Association (APA) and Simpson Strong-Tie... Read More June 2019 Issue #11239 Page 82
Questions Answered: Strong-Wall® Site-Built Portal Frame System Simpson Strong-Tie Staff In this article, we follow up on our April 17 webinar, Meeting Braced-Wall Requirements: A New Portal Frame Solution, by answering some of the interesting questions raised by attendees. During the webinar, we discussed how the Strong-Wall site-built portal frame system (PFS) provides... Read More June 2019 Issue #11239 Page 98
How Do I Choose Which Plates for a Critical Plate Inspection? Glenn Traylor The requirement is: an inspector will, on average, inspect one critical plate for every inspection made during a week. That requirement is the baseline number for the quantity of critical inspections to perform—but because some trusses do not have critical plates, it’s necessary to... Read More May 2019 Issue #11238 Page 36
What Decisions Should Truss Builders Be Able to Make? Glenn Traylor In the November 2017 article, “So Who Exactly is Responsible for Lumber Quality?”, we discuss the abundance of quality building materials and the responsibility of the fabricator to evaluate their application in products. We should recall the ultimate decision maker in determining... Read More April 2019 Issue #11237 Page 34
Steps to Minimize Snow Load Failures Mike Momb Early every year, the National Frame Building Association (NFBA) holds its annual Frame Building Expo—where thousands of post-frame builders, design professionals, and vendors meet for three days filled with break-out sessions, guest presenters, and, of course, a trade show. In... Read More April 2019 Issue #11237 Page 44
Choosing Resiliency: Lessons from Hurricane Michael Doug Allen Doug Allen, P.E., a structural engineer with Simpson Strong-Tie, looks at the choice homeowners in disaster-prone areas face between simply building to code and building to standards of resilience or IBHS FORTIFIED Home™ standards instead. Resilience, or resiliency: The capacity to... Read More April 2019 Issue #11237 Page 90