Designing Overhangs on Gable Ends Randy Shackelford It seems that each major hurricane tends to teach those of us in the construction industry some lesson. With Hurricane Andrew, the lessons were the importance of protection from windborne debris, and the importance of proper construction of gable ends. There are two main areas where gable... Read More November 2016 Issue #09208 Page 64
Letter to the Editor: On IBC bracing requirements Frank Woeste Dear Anna: A recent long span truss collapse during installation reminded me of the new 2009 (and later) IBC bracing requirements for the Owner of a project with metal plate connected (MPC) wood trusses spanning 60 ft. and greater (churches, schools, commercial, retail, and so on).... Read More November 2016 Issue #09208 Page 74
Question of the Day: Code Change Proposals on Wood Trusses Stan Sias Why are we seeing all the code change proposals regarding wood trusses in the current ICC code change/update process? It is true that there were several proposals submitted pertaining to wood truss restraint and bracing and another requiring special inspection of the installed truss... Read More October 2016 Issue #09207 Page 4
Tall Wood Buildings are Gaining Momentum Robert Glowinski National Forest Products Week Recognizes the Environmental and Economic Benefits of Wood Products The third week of every October is designated as National Forest Products Week, this year held October 16–22. Like others, we commemorate the week, an annual recognition of the many... Read More October 2016 Issue #09207 Page 52
Make Safety a Priority: Key Considerations for Residential Deck Design Robert Glowinski As we head into the fall, families across the country have been spending more time in the backyard, often on their porches or decks. This fact serves as a good reminder of the importance of ensuring the safety of the outdoor spaces we enjoy so much. Unfortunately, deck collapses all too often... Read More September 2016 Issue #09206 Page 42
How to Select a Connector Series – Holdowns Paul McEntee This article discusses how to select holdowns and tension ties, which are key components in a continuous load path. They are used to resist uplift due to shearwall overturning or wind uplift forces in light-frame construction. In panelized roof construction, holdowns are used to anchor concrete... Read More September 2016 Issue #09206 Page 64
Progressive Roof Collapse Due to CLR Shifting David Bohnhoff Overview Progressive roof collapse is a roof collapse in which the failure of a single structural component triggers a chain reaction of failures that result in a large portion of a roof collapsing onto the contents below. The shifting of continuous lateral restraint is well known as a... Read More September 2016 Issue #09206 Page 67
August Recess: An Opportune Time to Meet with Your Members of Congress Robert Glowinski Every August, federal lawmakers take a recess from their work in Washington, D.C. and use the month to visit constituents at home. For our industry, the recess (which goes through Sept. 6) provides an opportunity to schedule a meeting with members of Congress and their staff to discuss issues... Read More August 2016 Issue #09205 Page 39
How to Select a Connector – Hurricane Ties Keith Cullum When it comes to wood frame construction, hurricane ties are among the most commonly specified connectors. They play a critical role in a structure’s continuous load path and may be used in a variety of applications, like attaching roof framing members to the supporting wall top plate(s),... Read More August 2016 Issue #09205 Page 60
Building Roof Trusses for High Density Housing Joe Kannapell The differences between high density attached and tract style detached housing extend to the shop floor. Though truss designs may be similar, the project size, location and degree of repetition differs, influencing unit labor costs and material requirements. High density means “maximum... Read More July 2016 Issue #09204 Page 24