The advantages of open-web floor trusses are beginning to decelerate the growth of EWP. Though I-Joist sales per housing start have increased about 6% over the last two years, the trend has slowed considerably. Some of the small gain is due to the continuation of the replacement of solid-sawn...

Every day, component manufacturers are dealing with the entire spectrum of traditional and engineered wood products. In fact, educating your customers may be a key factor in your sales and services. Like you, the American Wood Council (AWC) sees how important education on wood can be to...

Larger beams are often built up out of smaller 2x or 1¾” members. This can be done for several different reasons: for the convenience of handling smaller members on the jobsite, or because solid 4x, 6x or glulam material is not readily available, or for reasons of cost. Engineered...

While the International Residential Code (IRC) gives the structural requirements and prescriptive design data for residential framing, additional help for the non-engineer is available through the Wood Frame Construction Manual for One- and Two-Family Dwellings (WFCM) published by the American...

While it’s well known that wood products offer a wide variety of environmental benefits – typically less embodied energy, lower air and water pollution, and a lighter carbon footprint than other commonly used building materials – it can often be a challenge to translate this...

A quick glance through the Simpson Strong-Tie® Wood Construction Connectors catalog shows that we manufacture at least 29 different models of face-mount wood-to-wood joist hangers, three separate models of face-mount wood-to-masonry hangers, 42 different models of top-flange wood-to-wood...