Floor trusses have been golden for the component industry for over half a century, and their origin is worth recounting and celebrating. Because of their flexibility and utility, wood trusses dominate apartment construction and have taken it up to 5 stories. Getting there, however, has required...

Recently, when a building owner started getting leaks in the roof and noticed unusual variations in the ceiling, I was asked to do an inspection to determine the best way to correct a deflection problem. Upon inspection, it was very evident that the roof trusses had not been installed correctly...

Over the many years I’ve worked in the truss business, I’ve had the unfortunate experience of visiting numerous job sites where the trusses have collapsed. Without fail, every one of those collapses has been the direct result of improper bracing, improper hoisting, or a combination...

When designing trusses for special loads or special conditions, it is important to define the individual truss members correctly. Without proper member definitions, trusses could be inadvertently under-designed and/or have incorrect analog. The most common member types are webs and chords. Top...

Trusses are designed as individual components to resist the in-plane stresses resulting from the loads applied in the same in-plane direction. To resist out of plane forces, adequate bracing/restraint is required. In absence of designed temporary and permanent bracing plans, BCSI (Building...

In the last article, we described the primary structural and wood-related changes in the 2021 International Residential Code, Chapters 3 and 4. This article will continue with the primary changes to Chapters 5 through 8 of the IRC. Decks For the 2018 and the 2021 IRC, an informal group...

Per BCSI-B4 (Building Component Safety Information): The term “construction loading” is typically used to describe Loads from workers and Building materials on unfinished structure, as, for example, when builders temporarily stack bundles of panel sheathing or gypsum board on...

This August marked the 30th anniversary of the Florida landfall of Hurricane Andrew, one of the most damaging, and influential, hurricanes ever to hit the United States. Hurricane Andrew hit South Florida with Category 5 winds early on the morning of August 24, 1992. Andrew caused damages of $25...

A Truss Design Drawing (TDD) includes specific information[1] for structural engineers and building designers: truss profile, plates, loadings, wind speed, codes, enclosure, exposure, reactions, deflections, materials, bracing, bearings, etc. The maximum reactions are the most important values...

As lumberyards continue to recover from pandemic-related supply issues, there’s been an ever-increasing shortage of building materials, creating many challenges for building contractors. These shortages have impacted availability of wood structural panel sheathing and, as a result, our...