What Decisions Should Truss Builders Be Able to Make? Glenn Traylor In the November 2017 article, “So Who Exactly is Responsible for Lumber Quality?”, we discuss the abundance of quality building materials and the responsibility of the fabricator to evaluate their application in products. We should recall the ultimate decision maker in determining... Read More April 2019 Issue #11237 Page 34
All Things Wood: IBC Balcony Changes Spur “Best Practice” Design Recommendations Frank Woeste Because of their limited structural redundancy and exposure to weather, cantilevered balconies require special attention by design professionals, contractors, permitting and inspection departments, and owners in-service. As shown in the photos, modern wood-framed, multi-family projects often... Read More April 2019 Issue #11237 Page 60
AWC Releases 2015 Deck Guide in Spanish Robert Glowinski Spring is upon us. Construction is ramping up nationwide. And, as we get ready to spend more time in our favorite outdoor spaces and decks, we must ensure they are safe for gatherings with family and friends. Just in time for the nicer weather, and the influx of construction workers, the... Read More April 2019 Issue #11237
Education on Wood Use Important to Marketplace Robert Glowinski Every day, component manufacturers are dealing with the entire spectrum of traditional and engineered wood products. In fact, educating your customers may be a key factor in your sales and services. Like you, the American Wood Council (AWC) sees how important education on wood can be to... Read More March 2019 Issue #11236 Page 76
AWC Releases Third Environment, Energy, and Safety Report Robert Glowinski In late 2018, the American Wood Council released its third biannual AWC Environment, Energy and Safety: Industry Progress Report. Compiled from data collected over the last decade, the report shows that there have been significant improvements by the industry in these three areas, even despite... Read More February 2019 Issue #11235 Page 80
Looking Back at 2018 and 2019 Outlook Robert Glowinski As 2018 draws to a close, the American Wood Council (AWC) looks back on what has been a very successful year for wood industry markets. Both federally and in the states, the opportunity for wood products has been greatly expanded, building codes have been very successfully updated to account for... Read More January 2019 Issue #11234 Page 78
Second Chance for Employees and Wood Products Robert Glowinski “Everything and everyone deserves a second chance.” That’s the philosophy of Second Chance Inc., a Baltimore-based non-profit that deconstructs homes and other buildings to salvage materials for reuse. It’s also a philosophy that the American Wood Council (AWC)... Read More December 2018 Issue #10233 Page 78
Errors in Substituting Dead Load for Live Load in Wood Design Scott Coffman Introduction Custom kitchens, with high-end appliances, granite countertops, and central islands, are becoming more and more prevalent in the home market today. These products and finishes are heavy and the dead loads from the central islands and/or cabinets positioned along interior... Read More October 2018 Issue #10231 Page 48
Now’s the Time to Promote Safe, Sustainable Construction Robert Glowinski October is a busy time for the wood products industry. There are not one but three weeks dedicated to national observances important to the safe built environment. Sunday, Oct. 7 – Saturday, Oct. 13: National Fire Prevention Week The National Fire Protection Association’s Fire... Read More October 2018 Issue #10231 Page 92
Still Using Lag Screws? Consider Self-Tapping Wood Screws Instead Aram Khachadourian, P.E. Lag screws are traditionally specified for many structural loads in wood construction. However, recent innovations in engineering for self-tapping wood screws have made them an increasingly popular, labor-saving alternative to lag screws. In the following, Aram Khachadourian, P.E., of Simpson... Read More October 2018 Issue #10231 Page 108