Library

Reflecting on the journey of building my on-site home versus years of off-site manufacturing, several insights have surfaced. While many may hesitate to do it again, I remain optimistic. Why the enthusiasm? Because every challenge I faced was met with a manufacturing mindset honed by the...

As I write this, I am sitting inside a warm office in Northern Ontario, looking out the window at near blizzard conditions, with heavy snow falling and –35° wind chill. Although it is very unpleasant outside, this isn’t necessarily unusual weather for this location, but what is...

The construction supply industry saw high lending rates and a relative lack of big transactions result in 22% fewer deals involving 2.6% fewer locations in 2023 vs. 2022. There also were 10% fewer buyers, with several big players barely present. But greenfield openings, while down 5% from 2022,...

In response to the increasing demand for mass timber construction, Simpson Strong-Tie  has created mass timber solutions for these builds. These product additions include our Heavy Seated Knife Plate (HSKP), ACBH concealed beam hanger,  and CBH concealed beam hanger. Gain insights into...

Until recently, vertical members have been the bane of all jigging systems, whether they occur on the perimeter or the interior of trusses. And they are found more than ever on apartment and residential designs. Handling these members without human intervention has been the Achilles heel of...

All human beings are flawed, some more so than others. When I think of Dan Holland, I cannot remember a time when he was anything less than a very good man. For more than a decade, I worked with Dan at WTCA/SBCA, both in his role as WTCA President and as Chapter President of the Mid South...

To complete this floor series, it’s worth examining how we’re doing against I-joists. [For all graphs and images, See PDF or View in Full Issue.] Mixed Signals: Many CMs think trusses are slowly making gains, and this is backed up by the brisk sales of floor machines. However,...

Over 7 years ago, we introduced the first of our new generation Spida Wall Extruders to the market. Today, we have taken a massive step further and it just keeps getting better. Recently demonstrated at BCMC 2023, the Spida Raked Wall Extruder can do it all – and it is only one part of an...

The winter months are normally the time to make changes to your processes within your area of influence. Depending on how your company is structured for decision-making, your influence and actions to stay competitive in the face of ever-increasing challenges will determine the long-term...

Originally intended as an improvement in lumber manufacturing, most dimensional lumber used for framing has a radius corner created during the planing process. The rounded corner radius is intended to make the lumber easier to handle and can improve the lumber’s performance because sharp...