Library

A contract, for the purposes of this discussion is an agreement to sell or buy a predetermined quantity,size and grade of lumber or panels, typically between a consumer and a producer...priced at current market value, "Friday Prior to Shipment." The buyer is assured of receiving...

For Component Manufacturers (CMs), it is generally well known that the Registered Design Professional (RDP) is responsible per ANSI/TPI 1 for the design of the permanent bracing system for the wood truss system. However, the issue of responsibility is only the first part of the actual design and...

Continuous Improvement  – Success is achieved, not from the program, but from the mindset Theory of Constraints. The Houlihan Labor Method. Quick Response Manufacturing. Six Sigma. Lean. Total Productive Maintenance. Total Quality Management. The lexicon, tools, and methods...

“The least number of touches,” says B. J. Louws, “equals the least cost.” That’s what he learned by careful study of his truss plant operations, and by continual experimentation to increase efficiency. B.J.’s strategy, which has enabled Louws Truss to become a...

Permanent bracing, what’s the big deal? I was recently on a jobsite talking with the Superintendent. The topic quickly turned to the trusses overhead (imagine that!) and I asked if he had a set of the Truss Design Drawings that came with them. He said he did and that they were in...

Recently, several people I know were asked to participate in satisfaction surveys. Though their situations differed, all of the surveys were motivated by good intentions. Even so, the results were mixed. As an outsider observing them, I’ve been struck by the things, both good and not so...

Before I launch into this month’s musings, I would like to thank everyone who has responded so positively to my writing. My hiatus from writing and publishing articles occurred when my primary outlet decided all of their article-writing should be done in-house. Not that I needed one more...

On behalf of all the self-proclaimed industry expert consultants (SPIEC) in the component manufacturing (CM) industry, I would like to state a rebuttal to a published article “Confusion is Starting to Confuse Me” written by Carl Schoening in the May 2016 issue of The Advertiser....

The sweet spot of wood component supply is high dollar, high density housing. Beneath expensive finishes are complex structures, and the opportunity to gain significant value. With advanced whole house software, CM’s are able to model the mechanical systems as an integral part of the...

Customers, vendors and friends know that I have taken considerable personal time recently, few know the reason why. While the seeds were planted nearly six years ago, our family embarked on a journey that started three and a half years ago. It all began with a friend, an international hosting...