When Fashion Affects Structure—Floor Design Considerations for Preventing Tile and Stone Cracks Frank Woeste Two kinds of designers are involved in home construction—design professionals responsible for the structure and the interior-focused designers responsible for the final appearance. Although these roles can overlap, it is important for design professionals to be aware of in-service demands... Read More June 2018 Issue #10227 Page 60
Remembering the “I” in BIM Steve Mickley Building Information Modeling (BIM) has started to become a common practice in the architectural, engineering, construction, and facilities management industries. The benefits of BIM have been recognized in commercial and industrial development, but the potential of BIM technology to facilitate... Read More May 2018 Issue #10226 Page 46
All Things Wood: Wood Frame Construction Manual—a Valuable Structural Design Guide Frank Woeste While the International Residential Code (IRC) gives the structural requirements and prescriptive design data for residential framing, additional help for the non-engineer is available through the Wood Frame Construction Manual for One- and Two-Family Dwellings (WFCM) published by the American... Read More January 2018 Issue #10222 Page 73
Lumber Briefs: Robotics: Labor Solution and The Future of the Housing Matt Layman The housing industry has been begging for workers going on a decade now. The American citizen work force is not answering the call. Consequently, housing construction has become completely dependent on undocumented workers. Meanwhile, Artificial Intelligence and Robotics technology are... Read More November 2017 Issue #10220 Page 71
Limitless Possibilities in Texas James Clinich When our Salesman, Ross Black, gave me the plans for the Clark Residence, I knew from the start that this was going to be a special project. I always enjoy working on these large single family custom homes, and this was no exception. For the most part, this home was not too difficult of a... Read More June 2017 Issue #10215 Page 54
Lumber Briefs: Transition From Multi-Family to Single Family Is Here Matt Layman For a few months now, I have detected an uneasiness among lumber buyers. Near term expectations are bullish, however, there is an underlying sense of caution. Something is just not quite right in the housing sector. I believe I know what it is. Winds of Change Several years ago, when... Read More April 2017 Issue #10213 Page 65
All Things Wood: A “Truss Frame” Safe Room for Protecting Your Family? Frank Woeste Being that it is early spring, it may be a good time to think about taking steps to protect your family in the event of a tornado. The 4th Edition of FEMA P-320, introduced below, contains a “treasure” of design information for constructing a residential safe room, either in the home... Read More April 2017 Issue #10213 Page 67
A Tale of Two Houses: Design Loads for Metal Plate Connected Wood Trusses Kelly Sias Take two trusses with identical profiles and environmental surroundings, and they should have the same design loads, right? Early in my career, I recall hearing a story about two identical buildings right next to each other that were designed for two different magnitudes of environmental loads.... Read More January 2017 Issue #10210 Page 72
Building Roof Trusses for High Density Housing Joe Kannapell The differences between high density attached and tract style detached housing extend to the shop floor. Though truss designs may be similar, the project size, location and degree of repetition differs, influencing unit labor costs and material requirements. High density means “maximum... Read More July 2016 Issue #09204 Page 24
High Density Housing’s Design Challenges Joe Kannapell The sweet spot of wood component supply is high dollar, high density housing. Beneath expensive finishes are complex structures, and the opportunity to gain significant value. With advanced whole house software, CM’s are able to model the mechanical systems as an integral part of the... Read More June 2016 Issue #09203 Page 22