Library

I have had the same conversations with so many executives concerning the tight labor market and rising labor costs. There is good and bad news concerning this subject. First, the good news is that you can be assured that high labor costs and a tight labor market are not only affecting your...

Everyone who uses lumber in trusses understands that defects in lumber can impact truss performance in different ways. Some defects are not important but others will affect truss performance and can even cause truss failure. [For all photos, See PDF or View in Full Issue.] In the first photo,...

What weighs more, a pound of muscle or a pound of fat? In truss jargon, the question would be: What produces more trusses, 200 pieces of batch cutting or 200 pieces of cut-by-truss cutting? The answer, of course, is that both cutting methods produce the same number of trusses. So what’s...

One of the central goals of the frame and truss sector is that everyone goes home safely every day. And while the Razer has been designed from the initial engineering stage with safety at the forefront, some customers, like Dahlsens, require more stringent safety aspects, so we customize...

Over the last few months, we have seen rates drop for those seeking to finance new or used equipment. Economists are pointing to even lower rates as the year goes on, but of course that will depend on whether the economy continues its downward inflation trend or not, on its way to the 2%...

Sponsored by the Virginia Tech Continuing and Professional Education program, a three-day program on light-frame and mass timber construction design topics will be offered on May 14–16, 2024 in Blacksburg, VA. Joining me as instructors this year are Scott D. Coffman, PE, John Holland, MBA,...

Spring is in the air and that means it’s time to register for MSRLPC’s annual MSR Workshop! Join attendees from across North America as they convene on April 17 in beautiful downtown Charlotte, NC, for three days of valuable learning and networking opportunities with an incredible...

Reflecting on the journey of building my on-site home versus years of off-site manufacturing, several insights have surfaced. While many may hesitate to do it again, I remain optimistic. Why the enthusiasm? Because every challenge I faced was met with a manufacturing mindset honed by the...

As I write this, I am sitting inside a warm office in Northern Ontario, looking out the window at near blizzard conditions, with heavy snow falling and –35° wind chill. Although it is very unpleasant outside, this isn’t necessarily unusual weather for this location, but what is...

The construction supply industry saw high lending rates and a relative lack of big transactions result in 22% fewer deals involving 2.6% fewer locations in 2023 vs. 2022. There also were 10% fewer buyers, with several big players barely present. But greenfield openings, while down 5% from 2022,...