Skip Navigation

Our Article Library

Number of search results: 148

Todd Drummond

Before You Invest in Automation

Todd Drummond

Elon Musk’s five rules for improving a process end with automation. That order deserves attention from every executive considering new equipment or software. When labor is difficult to find, costs are rising, and customer commitments are harder to meet, technology can look like the obvious...

#18328 Cover image
November 2026
Issue #18328
Page 51
Todd Drummond

Consistent Management Across Locations With Freedom to Choose Plate Vendors

Todd Drummond

Imagine, if you will, two different component manufacturers (CMs) owned by the same parent company bidding against each other on the same project. Each location wants the order. As they compete on price, they drive down their own company’s revenue and gross margin. One location may win the...

#18327 Cover image
October 2026
Issue #18327
Page 77
Todd Drummond

Freedom to Choose Any Plate Vendor Without Disrupting Your Operation, Part 2

Todd Drummond

Last month, I published “Freedom to Choose Any Plate Vendor—Without Disrupting Your Operation,” which explained why a component manufacturer (CM) needs practical supplier alternatives, not merely the ability to change vendors. This month, I’ll show how you can keep the...

#18326 Cover image
September 2026
Issue #18326
Page 61
Todd Drummond

Freedom to Choose Any Plate Vendor — Without Disrupting Your Operation

Todd Drummond

Most component manufacturers (CMs) do not choose a plate vendor based only on connector plate pricing. The decision also affects engineering, technical support, training, production planning, software, reporting, and other parts of the business. Over time, those systems can become so connected...

#18325 Cover image
August 2026
Issue #18325
Page 57
Glenn Traylor

Are You Sawing Smarter, Not Harder?

Glenn Traylor

Do you prefer using a linear saw or a component saw? Both saws can cut lumber cleanly, so other factors need to be considered, especially when batching your cutting. Often, batching decisions are made solely on cutting quantity. While this is a very important factor, the decision is more...

#18324 Cover image
July 2026
Issue #18324
Page 19
Todd Drummond

Make It Better, Then Make It Better Again

Todd Drummond

By July, most manufacturing leaders already have a good idea how the year is going. They know where orders are strong. They know where labor is tight. They know which customers are creating pressure. They know which departments are struggling to keep up. But the more important question is not...

#18324 Cover image
July 2026
Issue #18324
Page 69
Todd Drummond

Improve Labor Visibility While Keeping Existing Methods in Place

Todd Drummond

One of the most common problems in component manufacturing is not that companies lack effort, experience, or good people. The problem is that many companies are still trying to price, schedule, and measure labor using methods that were never accurate enough for the decisions being made. Board...

#18323 Cover image
June 2026
Issue #18323
Page 59
Todd Drummond

Profit Leaks Where Work Is Not Visible Enough to Control

Todd Drummond

When business gets tougher, hidden weaknesses stop being minor frustrations and start becoming profit leaks. Leaders cannot afford recurring quality issues, unclear job status, missed follow-up, or managers spending hours chasing information that should already be visible. Most companies do...

#18322 Cover image
May 2026
Issue #18322
Page 75
Todd Drummond

It’s Not a People Problem, It’s a Clarity Problem

Todd Drummond

Good people show up. They work hard. They care. Yet output still stalls, quality still slips, due dates still move, and managers still spend too much of their day answering questions, expediting work, and solving the same problems again and again. Because when work is unclear, effort gets...

#18321 Cover image
April 2026
Issue #18321
Page 50
Todd Drummond

Board Foot and Work Minutes Can Coexist

Todd Drummond

Board foot has been used for decades in component manufacturing, and it still serves its purpose for sales reporting, legacy KPIs, and corporate roll ups. There is no need to abandon it. But for scheduling, pricing, and determining how much work a plant can actually handle, board foot alone will...

#18320 Cover image
March 2026
Issue #18320
Page 46
Christine Wagner

Working for the Industry, From the Show Floor to the National Mall

Christine Wagner

In the span of less than two weeks, the Structural Building Components Association (SBCA) went from a packed trade show floor in Columbus, Ohio to a 3,000-square-foot, two-story duplex standing on the National Mall in Washington, D.C. Those are two very different settings. But together, BCMC...

#18327 Cover image
October 2026
Issue #18327
Page 168
Christine Wagner

What to Expect at BCMC 2026

Christine Wagner

The Building Component Manufacturers Conference (BCMC) and Framer Summit returns to Columbus, Ohio, September 14–18, bringing together component manufacturers, suppliers, framers, and industry professionals for a week centered on practical learning, emerging technology, and face-to-face...

#18325 Cover image
August 2026
Issue #18325
Page 160
Joe Kannapell, PE

The Last Word: Tracking Labor After Houlihan

Joe Kannapell, PE

As discussed in The Last Word in May, “John Houlihan’s Contributions,” John Houlihan introduced a proven way to manage plant labor, applying his trade to plant systems as they were, rather than how they could be, which was reflective of his background outside our industry. When...

#18324 Cover image
July 2026
Issue #18324
Page 188
1345678910Last

Search By Keyword

Issues

Book icon The Monthly Publication for the SBC and Off-Site Construction Industry