Library

Building components is really great! It was a lot of fun in the 1970s when several plants had competitions on who could build the fastest run of trusses (for example, see Joe Kannapell’s article, Vertical Presses—The World Record). Back then, it was really easy to calculate cycle...

Back in the days before Autoset C®, Matchpoint®, and Wizard®, truss set-ups and the truss profile were dependent on the truss builder’s ability to accurately jig the truss being built using cross reference information and data. For example, a heel to peak measurement was taken...

One of the many realities of living in the upper Midwest is dealing with the cold and icy conditions of its sometimes perilous winter. So you can imagine as an Australian native, where the temperature rarely drops below 32° (or 0°C for the rest of the world), this was quite the...

An anonymous former lumberyard CEO of 17 lumberyard locations (LBM) explained to me that his two component manufacturing (CM) plants made up only 10% of his sales yet contributed 30% of his net profits. He wished he had given the CM division far more focus and resources. As a guru for process...

Last month’s article launched our series on the most advanced panel design software in decades: Truebuild® Layout with panel design functionality. Written from the ground up by industry veterans and developed by the best in-house team in the industry, we listened to what you needed,...

Alpine’s STITCHER software makes a big difference for A-1 Roof Trusses providing rapid turn-around of bids—and much more The Product / The Speed STITCHER is a unique software tool developed by Alpine to free component estimators and designers from repetitive tasks and to speed...

For years, I’ve been interested in why the residential building industry has been so slow to innovate. Other industries constantly innovate. The U.S. automobile industry, arguably pushed along by Japan and European car makers, continues to advance its products and production methods....

Last month’s issue of The Advertiser included a story from us about using, reusing, and repurposing lumber, Responsible Building at Pacific Wall Systems, Inc. In it, we talked about the ways that we use our wood scraps. In addition, pieces smaller than 6” are donated to the community...

Go to a meeting about modular construction, mass timber, and other off-site components manufacturing and odds are one of the speakers will show this chart [See PDF or View in Full Issue]. I’ve been to events where four consecutive speakers showcased it in their presentations. Some of these...

Today, senior designers working in the office are involved not only with designing day to day projects, but also with providing training, solving problems for lower level designers, and working with customers. Their experience and knowledge are invaluable in many respects. But, consider this:...