Can Designs Be Modified During Truss Manufacture? Glenn Traylor The simple answer to the title question, can designs be changed during manufacturing, is yes. But, the situation is rarely straightforward and simple in reality. The better question is: What considerations are necessary when making modifications to the design while manufacturing a truss? To... Read More June 2021 Issue #13263 Page 41
Are the Rising Lumber Prices Changing Your Tune? Glenn Traylor The way we evaluate a stick of lumber may be changing, but that is not without risk. I’m reminded of a song written by Baker Knight and recorded by American country music artist Mickey Gilley in the 1970s. You might remember the tune, but I wanted to update you on some new... Read More May 2021 Issue #13262 Page 39
Can a Fabricator Mix or Substitute Connector Plates from Different Manufacturers? Glenn Traylor The simple answer is no, not normally, but the reasoning behind that answer merits discussion. It should come as no surprise that truss connector plates are tied to design software and ultimately engineering design. The problem is one plate manufacture is not equivalent to another plate... Read More March 2021 Issue #13260 Page 39
Does Your Truss Plant Understand the Importance of Tooth Count? Glenn Traylor On a recent truss plant visit, I watched a group of truss builders quickly assembling a structural gable truss. Most of the webs had been installed and the builders were top and back plating the truss. As I approached the builders, they relaxed their pace just a notch as I walked up to the web... Read More February 2021 Issue #13259 Page 39
Can Automation Eliminate Paper in the Truss Plant? Glenn Traylor With the invention of integrated production methods, one of the greatest evolutions has been the electronic transfer of information from the truss designs to the computerized equipment, eliminating human error and translation issues. Automatic puck systems, lasers, ink jet marking, or shop... Read More January 2021 Issue #13258
Who is Responsible for Lumber Quality in Your Trusses? Glenn Traylor There are many steps in the process of bringing lumber to the truss plant to be used in our trusses. Lumber must be harvested then sawn. Drying and planing brings the lumber closer to potential use, but it is not until the lumber makes it through the grading process that it is suitable for use.... Read More December 2020 Issue #12257 Page 37
Are You Missing an Opportunity to Market Your Product? Glenn Traylor Last month’s article, “Are Your Deliveries Making the Right Impression,” talks about aligning your product so the installers’ first impression is a positive one. Let’s expand this further. I am sure you have noticed the freight trucks on the highway moving product... Read More November 2020 Issue #12256 Page 35
Premium Defined Mike Wisnefski The American Lumber Standard first published a standard for lumber in 1924 which delineated lumber sizes and assigned design value methods, classification, inspection procedures, the National Grading Rule, an accreditation program, and other specified functions. It was the first foray into such... Read More November 2020 Issue #12256 Page 102
Are Your Deliveries Making the Right Impression? Glenn Traylor So you won the order. Congratulations. The designs and the submittals were approved. Sounds great. The trusses were built with care and meet all of the necessary requirements. Awesome! Does it stop here? No, not really. The customer has not had a chance to really get a rock-solid impression.... Read More October 2020 Issue #12255 Page 35
Are Your Trucks Loaded Correctly? Glenn Traylor Recently while traveling, I photographed a load of structural components being delivered to a jobsite. It was a little of a double-take to comprehend what was on the truck, because our products really shouldn’t be that curved when they’re designed to be flat. As shown in the photo... Read More September 2020 Issue #12254 Page 35